ME1200H specifications   Discontinued!







Frequency Coverage: All amateur bands in the 1.8-29.7MHz range,(incl. WARC)
  extensions and/or changes   on request.
Power Output: 1400 W PEP or 1000 W continuous carrier.
Intermodulation Distortion: Better than 35 dB below rated output.
Hum and noise: Better than 40 dB below rated output.
Harmonic Output Suppression: Better than 50 dB below rated output.
Input and Output Impedances:

   - nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;
   - input circuit: broadband, VSWR <1.5:1, 3.5-30MHz continuously (no tunings,no
   - Bypass path VSWR < 1.1:1, 1.8-30MHz continuously, 100 W maximum;
   - Output (antenna) impedance matching capability: VSWR up to 3:1 

Protection circuits:Ia>1000mA,Ig1>350mA,TMP>75C,SWR>3
RF Gain: 11dB typically, frequency response < 1dB (80-100 W drive power for
   rated output).
Primary Power: 220-240 V AC, 50-60 Hz, single phase, 2300 VA.
Complies with CE safety and electromagnetic compatibility requirements.
FAN :built in 230V/13W AC fan PAPST type 4605,12V/0.15A DC fan.
Size & Weight : WxDxH: 410x340x185mm, 25kg 
Operating environments:
   - temperature range: 0...+50 degs.Celsius;
   - humidity: up to 95% @ +35 degs.Celsius.
   - height: up to 3000m above sea level without output deterioration


Mechanics & Electronics Inc.  1991-2011.  All rights reserved