|
•
Frequency Coverage: 144-146MHz amateur
band.
extensions and/or changes on request. •
Power Output: 1000 W PEP or 750 W
continuous carrier. • Intermodulation
Distortion: Better than 35 dB below rated output. • Hum and noise: Better than 40 dB below rated output.
• Harmonic Output Suppression: Better than
70
dB below rated output. • Input and Output
Impedances:
- nominal value: 50 Ohm unbalanced, UHF (N) type connectors; - input circuit:
tuned,
VSWR <1.5:1
- Bypass path VSWR < 1.1:1, 144-146MHz
continuously, 100 W maximum; - Output (antenna)
impedance matching capability: VSWR up to 2:1
• Protection
circuits:Ia>750mA,Ig1>25mA,IG2>35mA,SWR>2
• RF Gain: 18dB typically, frequency response
< 1dB (10-15W drive power for
rated output).
•
Built in 3-way PIC controlled sequencer.

•
Primary Power: 220-240 V AC, 50-60 Hz, single phase, 1600
VA. •
Complies with CE safety and
electromagnetic compatibility requirements.
• FAN :built in
230V/13W AC fan PAPST type 4605,12V/0.15A DC FAN
-optional 120m3 radiall fan is available! •
Size &
Weight : WxDxH: 410x340x185mm, ~25kg • Operating environments:
- temperature range: 0...+50 degs.Celsius;
- humidity: up to 95% @ +35 degs.Celsius.
- height: up to 3000m above sea level without output
deterioration |