ME750-V specifications
        
 

Specifications

Photograps

Manual

Diagram

Back

   
   
 

Frequency Coverage: 144-146MHz amateur band.
  extensions and/or changes   on request.
Power Output: 1000 W PEP or 750 W continuous carrier.
Intermodulation Distortion: Better than 35 dB below rated output.
Hum and noise: Better than 40 dB below rated output.
Harmonic Output Suppression: Better than 70 dB below rated output.
Input and Output Impedances:

   - nominal value: 50 Ohm unbalanced, UHF (N) type connectors;
   - input circuit: tuned, VSWR <1.5:1
   - Bypass path VSWR < 1.1:1, 144-146MHz continuously, 100 W maximum;
   - Output (antenna) impedance matching capability: VSWR up to 2:1 

Protection circuits:Ia>800mA,Ig1>250mA,TMP>75C,SWR>2
RF Gain: 12dB typically, frequency response < 1dB (50 W drive power for
   rated output).
 Built in 3-way PIC controlled sequencer.
Primary Power: 220-240 V AC, 50-60 Hz, single phase, 1600 VA.
Complies with CE safety and electromagnetic compatibility requirements.
FAN :built in 230V/13W AC fan PAPST type 4605,12V/0.15A DC FAN
- optional 120m3 radiall fan is available.
Size & Weight : WxDxH: 410x340x185mm, ~25kg 
Operating environments:
   - temperature range: 0...+50 degs.Celsius;
   - humidity: up to 95% @ +35 degs.Celsius.
   - height: up to 3000m above sea level without output deterioration

   
   
   

Mechanics & Electronics Inc.  1991-2014.  All rights reserved