|
- Frequency
Coverage: 144.0-146.0MHz band.
- IF
in/out Frequency : 28.0-30.0MHz, or 14.0-16.0MHz
- LO frq stability: Low phase noise
TCXO, AXTAL
<0.5ppm. (0-+50C)
- I/O Impedance : 50
Ohm unbalanced - ant coax
jack "N" type.
- Input Voltage : 13.8VDC, +-5%, polarity
mismatch,
10A -40dB EMI filter.
- Power
Consumption : 0.58A RX, 5.8A TX @30W output,
10.0A @60W on ME2HT-PRO2
- Size & Weight
: WxDxH: 240x210x70mm, 2.3kg.
RECEIVING
SECTION
- RX front-end :
<0.8dB
NF,overall NF typ 1.0dB,OIP3 typ 35dBm ,IIP3
typ.+10dBm!
- PGA-103+
front end
- RX RF mixer : HJK-251H+
(IP3 >32dBm!)
- RX
overall
gain : Typ 25dB variable,
- IF rejection :
>85dB
TRANSMITTING
SECTION
- Power
Output: 30W (
50W on ME2HT-PRO2 version) continuous carrier.
- IF
power input: -20 to +37dBm (switchable
built in att.) Single or 2x IF cable operation.
- SWR input : 1:1.1
- Emission modes : CW,
SSB,
FM, Digital
- Harmonic
Output Suppression: >70dB
below rated output.
FEATURES
-
RA30H1317M
Mitsubishi RF Power Module, RA80H1415M on ME2HT-PRO2 version
-
Built in
ext. fan speed controller circuit
-
LED
bargraph Power meter
-
Variable
output PWR (front
page,5-30W)( 5-60W on ME2HT-PRO2 version)
-
SND jack
for ext PAs (GND out when TX, open collector +50V/0.5A max)
-
ALC circuit
-
IF RF VOX
-
Optional
fan module (2pcs 50x50mm external fan ) standard on
ME2HT-PRO2
-
Built in
heatsink temp. sensor
-
IF input
& output BNC connectors
-
Common or
separate 2m TX/RX connectors.
-
Second
RX IF (SDR) output possibility
-
20A type
DC connectors
-
Optional
IF RX, TX and PTT cables
-
Built in jumperable IF amplifier to low out level radios(IC7600,7800,FTDX5000 )
-
Easy
connection to ME14-X or ME28-X Xtal IF preselector.
Operating environments:
- temperature range: 0...+50 degs.Celsius;
- humidity: up to 95% @ +35 degs.Celsius.
|
