• Frequency Coverage: 69.9-70.5MHz  band.
• IF in/out Frequency :   27.9-29.5MHz,
  
• LO frq stability:  Low phase noise, 0.5ppm AXTAL TCXO's!

• I/O Impedance : 50 Ohm unbalanced
• Input Voltage : 13.8VDC, +-5%, polarity mismatch, 10A -40dB EMI filter.
• Power Consumption: 0.55A  on RX, 5.7A on TX @30W out,
  
• Size & Weight : WxDxH: 240x270x95mm, 1.7kg
  

RECEIVING SECTION

• RX front-end : <1dB NF,overall NF typ 0.9dB,OIP3 typ +24dBm ,IIP3 typ.+2dBm
• RX RF mixer : SRA2-H by MCL.
• RX overall gain : max.26dB (variable btn 12 to 26dB)
• IF rejection : >80dB

    TCXO side noise -140dBm at 10KHz.
    RX connector:  "N" type 4m common  TX/RX  ANT, or separate 4m RX "N" type connectors.
    BNC type IF connectors, 1X spare "N" AND 1x spare BNC connector.

TRANSMITTING SECTION

• Power Output: 30W, at continuous carrier.
• IF power input: -20 to +37dBm (switchable built in  5W att)
• SWR  on IF input : 1:1.1 max.
• Emission modes : CW, SSB, FM, Digital
• Harmonic Output Suppression: >60dB below rated output

FRONTPAGE SCREEN
 
   3.2" color display controlled by Arduino Mega

   FWD,REV,Watt, TX/RX ,Main voltage,Current,Temperature,fan speed displayed.

   Analog frontpage RF output PWR control  btn. 4-30W typ.

   >2.2 VSWR,overcurrent,high temp. faults displayed with autoreset function.
    + more features controlled by Arduino...

FEATURES

• RA30H0608M Mitsubishi RF Power Module,
  

• Built in ext. fan  speed controller  circuit

•  Color LCD bargraph frontpage FWD , REV, current,TMP,Ut meter

• SND jack for ext PAs (GND out when TX, open collector +50V/0.5A max)
  +12V out for ICOM radios.( to switch  it to transverter mode)

• 9 pole Sub-D connector for external service.( PTTin,+13,8V on TX, 2nd SND out etc.)

• ALC circuit

• Built in 50mSec sequencer

• Optional fan module (2pcs 50x50mm external fan).

• IF input & output BNC connectors( single IF in, single IF out for IF transceiver.)

• Common TX/RX or separate 4m RX connectors.

• 20A type DC connectors

• Optional IF RX, TX and PTT cables

• Built in jumperable IF amplifier to low out level radios(IC7600,7610,FTDX5000 etc.)

• Built in heatsink  temp. sensor

• Operating environments:
  - temperature range: 0...+50 degs.Celsius;
  - humidity: up to 95% @ +35 degs.Celsius.
  

Mechanics & Electronics Inc.  1991-2023. All rights reserved