| |
- Frequency Coverage: 50-52MHz band.
- IF
in/out Frequency : 28-30MHz
- LO frq
stability: Low phase noise TCXO, Better than +-1ppm 0-+60C,<0.5ppm @25oC.
- I/O Impedance
: 50 Ohm unbalanced - coax jack UHF type.
- Input
Voltage : 13.8VDC, +-5%, polarity mismatch, 10A -40dB EMI filter.
- Power
Consumption : 0.46A RX, 5.5A TX @30W output.
- Size & Weight :
WxDxH: 240x210x70mm, 1.6kg.
RECEIVING
SECTION
- RX front-end :
<1dB NF, >27dBm OIP3,PGA-103+ LNA
- RX RF mixer : MCL
SRA-1H, +17dBm
- RX overall gain :
max. 22dB variable
- IF rejection :
>85dB
TRANSMITTING
SECTION
- Power
Output: 30W continuous carrier.
- IF power
input: -20 to +37dBm (switchable built in
att.) Single or 2x IF cable operation.
- SWR input : 1:1.1
- Emission modes : CW,
SSB, FM, Digital
- Harmonic
Output Suppression: Better than 60 dB below rated output.
FEATURES
-
RA30H0608M
Mitsubishi RF Power Module
-
Built in
ext. fan speed controller circuit
-
LED
bargraph Power meter
-
Output PWR
poti on the front page (5-30W)
-
SND jack
for ext PA's (GND out when TX, open collector +50V/0.5A max)
-
ALC circuit
-
Optional
fan module (2pcs 50x50mm external fan on holder plate
-
Built in
heatsink temp. sensor
-
IF input
& output BNC connectors
-
20A type
DC connectors
-
Optional
IF RX, TX and PTT cables
Operating
environments:
- temperature range: 0...+50 degs.Celsius;
- humidity: up to 95% @ +35 degs.Celsius.
|
